Improvement of an efficient separation method for chemicals in diesel exhaust particles: analysis for nitrophenols

GOAL, SCOPE, AND BACKGROUND: Diesel exhaust is believed to consist of thousands of organic constituents and is a major cause of urban pollution. We recently reported that a systematic separation procedure involving successive solvent extractions, followed by repeated column chromatography, resulted in the isolation of vasodilatory active nitrophenols. These findings indicated that the estimation of the amount of nitrophenols in the environment is important to evaluate their effect on human health. The isolation procedure, however, involved successive solvent extractions followed by tedious, repeated chromatography, resulting in poor fractionation and in a significant loss of accuracy and reliability. Therefore, it was crucial to develop an alternative, efficient, and reliable analytical method. Here, we describe a facile and efficient acid-base extraction procedure for the analysis of nitrophenols. MATERIALS AND METHODS: Diesel exhaust particles (DEP) were collected from the exhaust of a 4JB1-type engine (ISUZU Automobile Co., Tokyo, Japan). Gas chromatography-mass spectrometry (GC-MS) analysis was performed with a GCMS-QP2010 instrument (Shimadzu, Kyoto, Japan). RESULTS: A solution of DEP in 1-butanol was extracted with aqueous NaOH to afford a nitrophenol-rich oily extract. The resulting oil was methylated with trimethylsilyldiazomethane and subsequently subjected to GC-MS analysis, revealing that 4-nitrophenol, 3-methyl-4-nitrophenol, 2-methyl-4-nitrophenol, and 4-nitro-3-phenylphenol were present in significantly higher concentrations than those reported previously. DISCUSSION: Simple acid-base extraction followed by the direct analysis of the resulting extract by GC-MS gave only broad peaks of nitrophenols with a poor detection limit, while the GC-MS analysis of the sample pretreated with (trimethylsilyl)diazomethane gave satisfactorily clear chromatograms with sharp peaks and with a significantly lowered detection limit (0.5 ng/ml, approximately 100 times). CONCLUSION: The present method involving an acid-base extraction, in situ derivatization, and GC-MS analysis has shown to be a simple, efficient, and reliable method for the isolation and identification of the chemical substances in DEP.     

Anthropogenic radionuclides in sediment in the Japan Sea: distribution and transport processes of particulate radionuclides

Distributions of anthropogenic radionuclides ((90)Sr, (137)Cs and (239+240)Pu) in seabed sediment in the Japan Sea were collected during the period 1998-2002. Concentration of (90)Sr, (137)Cs and (239+240)Pu in seabed sediment was 0.07-1.6 Bq kg(-1), 0.4-9.1 Bq kg(-1) and 0.002-1.9 Bq kg(-1), respectively. In the northern basin of the sea (Japan Basin), (239+240)Pu/(137)Cs ratios in seabed sediment were higher and their variation was smaller compared to that in the southeastern regions of the sea. The higher (239+240)Pu/(137)Cs ratios throughout the Japan Basin were considered to reflect production of Pu-enriched particles in the surface layer and substantial sinking of particulate materials in this region. In the southern regions of the Japan Sea (<38 degrees N), both inventories and (239+240)Pu/(137)Cs ratios in sediment were larger than those in the other regions. In the southern Japan Sea, observations suggested that supply of particulate radionuclides by the Tsushima Warm Current mainly enhanced accumulation of the radionuclides in this region.     

Distribution of Poly(β-propiolactone) Aerobic Degrading Microorganisms in Different Environments

The distribution of degading microorganisms of high molecular weight poly(-propiolactone) (PPL), whose individual structural units are similar to those of poly(-hydroxybutyrate) (PHB) and poly(€-caprolactone) (PCL), was examined. Despite the fact that PPL is a chemosynthetic polymer, many kinds of PPL-degrading microorganisms were found to be distributed as resident populations widely in natural environments. A total of 77 strains of PPL-degrading microorganisms was isolated. From standard physiological and biochemical tests, at least 41 strains were referred to as Bacillus species. Microbial degradation of fibrous PPL proceeded rapidly in some enrichment cultures but was not as complete as that of PHB. Most of the isolated PPL-degrading microorganisms were determined to be PCL degraders and/or PHB degraders. Therefore, it can be assumed that mostly PPL is recognized by the microorganisms as PHB or another natural substrate of the same type as which PCL is regarded. Microbial degradation of PPL was confirmed by some Bacillus strains from type culture collections. The similarity of microbial degradation between PPL and PCL was found to be very close.     

De novo formation characteristics of dioxins in the dry zone of an iron ore sintering bed

The objectives of this work are to understand the details of the mechanism of dioxin formation in the part of a sintering bed termed the dry zone, and to obtain ideas on how to prevent their formation. Sinter mixtures of various composition types were heated in a packed bed reactor, and dioxins in the outlet gas and in the sinter mixture residue were measured. The dioxin formation potential of a simple sinter mixture composed of iron ore, coke and limestone was markedly lower than that of fly ash from a municipal solid waste incinerator (MSWI). In consideration of this result, a series of experiments were conducted using a sinter mixture impregnated with CuCl2. Experimental results showed that dioxin formation was temperature-dependent in the range of 300-550 degrees C, with the maximum observed at around 300 degrees C, which was quite similar to that of fly ash from the MSWI. The homologue distribution of PCDD/Fs in gas and solid reflected the possible difference in carbonaceous materials in coke and activated coke. Gaseous hydrogen chloride acted as a chlorinating reagent for dioxin formation.     

CDNA microarray assessment for ozone-stressed Arabidopsis thaliana

Various detrimental factors in the environment damage plants, resulting in growth inhibition or withering. However, it is not easy to identify causal factors by visually inspecting the damaged plants. Therefore, we have developed a sensitive and reliable method for plant diagnosis, based on measuring changes in expression of a set of genes in a DNA microarray. With this method, we have been able to detect and discriminate between plants stressed by ozone, drought, or wounding.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in sediment, soil, fish, shellfish and crab samples from Tokyo Bay area, Japan

Concentrations of tetra- to octa-chlorinated dibenzo-p-dioxins and dibenzofurans in samples collected in or near Tokyo Bay, Japan, with a densely inhabited catchment area, were congener-specifically determined and discussed. Analyzed in this study were samples of surface sediment covering the whole bay area, reference soil representing atmospheric impact, and fish, shellfish and crab commonly consumed as food. The range of concentrations were comparable to or higher than those in other parts of Japan. The origins of these compounds in the catchment area of the bay were investigated in terms of homolog and isomeric compositions in the sediment samples. Biota-sediment accumulation factors for benthic species declined as the degree of chlorination increased.     

Evaluation of fecal pollution of river sediment by detection of urobilin

In this study, we attempted to establish a new indicator for fecal pollution of river sediment using a sensitive detection method for urobilin. Urobilin contained in sediment was extracted with an alkaline buffer solution. The suitable buffer solution for extraction of urobilin consisted of 0.1 M Tris-HCl buffer (pH 10.0) containing 0.1 m sodium chloride. The ratio of sediment to buffer was 1:10. The distribution of urobilin in river sediment was studied by this method. The amount of urobilin in the river sediment of Tokyo (urban) and the Miura peninsula (rural) area was surveyed. Large quantities of urobilin were detected in the sediments of the urban rivers, but it was scarce in the rural rivers. Urobilin showed a higher content in sediment than in water. Urobilin in river sediment is distributed in large amounts in the lower reaches, where the water is polluted with domestic sewage and industrial waste, but is scarce in the upper streams. The amount of urobilin decreases to the lower layers.     

Formation of mutagens by photolysis of amino acids in neutral aqueous solution containing nitrite or nitrate ion

Nine amino acids, i.e., alanine, threonine, cysteine, glutamic acid, arginine, proline, tryptophan, phenylalanine and tyrosine, were irradiated with UV light in water containing nitrite or nitrate ion under neutral conditions. The mutagenicities of the ether extracts and the residual water layers of the reaction mixtures were assayed with and without S-9 mix using $\text{Salmonella typhimurium}$ TA98 and TA100. Three aromatic amino acids, tryptophan, phenylalanine and tyrosine, were found to give direct-acting and frameshift mutagens by irradiation in aqueous nitrite solution. Among them, the ether extract of tryptophan exhibited the strongest mutagenicity toward TA98. In the case of irradiation in aqueous nitrate solution, only the ether extract of tryptophan exhibited weak mutagenicity toward TA98 without S-9 mix. The effects of nitrite concentration, irradiation time and pH on mutagen formation from tryptophan and some characteristics of the produced mutagens were examined.     

Examination of dioxin fluxes recorded in dated aquatic-sediment cores in the Kanto region of Japan using multivariate data analysis

Past dioxin (coplanar polychlorinated biphenyl (Co-PCB), 2,3,7,8-substituted polychlorinated dibenzo-p-dioxin (PCDD) and 2,3,7,8-substituted polychlorinated dibenzofuran (PCDF)) fluxes recorded in dated aquatic-sediment cores were analyzed using principal component analysis (PCA). The data set consisted of samples from four cores collected from the Kanto region of Japan. Time trends and spatial differences in the dioxin flux were examined, and the potential relationship to emission sources was investigated. Twenty-five compounds and 58 core slices, corresponding to the later half of the 20th century, were subjected to the analysis. The PCA of both log-transformed and maximum-value-standardized data successfully divided the dioxin compounds into a small number of groups, and three similar clusters of Co-PCBs, PCDDs and penta- to hepta-CDFs were identified. PCB formulations used in the past are judged to have been responsible for the major part of the Co-PCB flux recorded in the sediment cores. However, the relationship to emission sources needs further investigation. It is suggested that most 2,3,7,8-substituted PCDDs and PCDFs are different from Co-PCBs in their emission sources or movements in the environment. The subcore clusters obtained from the PCA of log-transformed data show that the cores from different sampling areas exhibited distinct dioxin fluxes and compositions. Common time trends among the cores were more effectively summarized by the PCA of maximum-value-standardized data focusing on relative time trends. PC scores show that recently the flux of each dioxin compound in the four cores has been generally declining after having reached a peak.